Seri Rox
Tersedia dalam 42 pilihan warna
Desain bunga-bunganya terinspirasi oleh tekstur teraso alami.
Warnanya kaya dan beragam, mulai dari saturasi tinggi hingga nuansa abu-abu, serta nada hangat dan dingin.
Menggabungkan bahan lembaran dan gulungan, cocok untuk berbagai skenario.
Menggunakan plastisizer asam sitrat kelas makanan—aman, tidak beracun, dan lebih ramah lingkungan.
Tahan aus, tahan tekanan, dan tahan lama
Stabilitas dimensi yang kuat
Perlakuan permukaan tahan tembakau dan noda
Skenario yang berlaku: Pabrik, sekolah, supermarket, kantor, rumah sakit
Testing Items | Testing method | Test Results |
Appearance | GB/T 11982.2 | Compliant |
Length | GB/T 11982.2 | 15M |
Width | GB/T 11982.2 | 2M |
Overall thickness | GB/T 11982.2 | 2mm |
Rate of Dimensional Change After Heating | GB/T 11982.2 | Through |
GB/T 11982.2 | Through | |
Thermal Warping | GB/T 11982.2 | Through |
Flexibility | GB/T 11982.2 | No cracking |
Chair caster test | GB/T 11982.2 | No damage |
Colorfastness | GB/T 11982.2 | Level 6 or higher |
Residual Depression | GB/T 11982.2 | Through |
Welding strength | GB/T 11982.2 | Through |
GB/T 11982.2 | Through | |
Wear resistance | GB/T 11982.2 | T-Class |
Coefficient of static friction | GB/T 4100 | Through |
GB/T 4100 | Through | |
Non-slip rating | GB/T 11982.2 | R10 |
Pollution resistance | GB/T 11982.2 | Level 0 |
Volatile content | GB 18586 | Compliant |
Soluble lead and cadmium | GB 18586 | Compliant |
Vinyl chloride monomer content | GB 18586 | Not detected |
Formaldehyde | GB 18580 | Not detected |
Combustion Performance | GB 8624 | B1 |
The data listed mostly come from third-party testing conducted specifically on the samples provided, and variations may occur across different batches or between different testing institutions.
Inspection Items | Inspection Methods | Test Results |
Length | ISO 24342 | 15m |
Width | ISO 24342 | 2m |
Overall Thickness | ISO 24342 | 2.0mm |
Residual Indentation | ISO 24343 | 0.05mm% |
Cigarette Test | EN 1399 | Grade 3 |
Dimensional Stability After Heating | ISO23999 | X Direction: 0.00% |
ISO23999 | Y Direction: 0.05% | |
Warping After Heating | ISO23999 | 0.00mm% |
Slip Resistance Grade | EN 16165 | R9/R10 |
Abrasion Resistance | EN 13845 | Particle Loss <10% |
Volume Loss | EN13329 | Roll Material 0.8 (After 20,000 Revolutions) |
Color Fastness | ISO 105B02 | ≥ Grade 6 |
Caster Wear | ISO 4918 | No Damage |
Combustion Performance | EN 13501 | B |
TVOC | Pass | |
MAS | Pass | |
Floorscore | Pass |
The listed data are mostly third-party data tested only on the submitted samples; differences in batches and testing institutions may cause data variations.
Inspection Item | Inspection Method | Test Result |
Length and Width | ASTM F2055-10 | 2M*15M |
Thickness | ASTM F386 | 2.0mm |
Residual Indentation | ASTM F1914 | Pass |
Flexibility | ASTM F137 | Pass |
Dimensional Stability | ASTM F2199 | Pass |
Stain Resistance | ASTM F925 | Grade 0 |
Heat-Induced Dimensional Change Rate | ASTM F1514 | Pass |
Color Fastness | ASTM F1515 | ≥ Grade 6 |
Static Load Test | ASTM F970 | Pass |
Static Coefficient of Friction | ASTM C1028 | Pass |
ASTM C1028 | Pass | |
Smoke Toxicity | ASTM E662 | Pass |
Critical Radiant Flux of Floor Covering Material | ASTM E648 | Pass |
The listed data are mostly third-party data tested only on the submitted samples; differences may exist between batches and testing institutions.
邮箱提交
Daftar untuk buletin kami*
*
