Серия Solid
The Solid Series доступен в 10 цветах.
Включает цвета от низкого до высокого контраста
Комбинирует листовые и рулонные материалы, подходящие для различных применений.
Износостойкий,耐压 (注：此处“耐压”英文原词 pressure - resistant 俄文对应“устойчивый к давлению”), и долговечный
Сильная размерная стабильность
Использование пищевых пластификаторов на основе лимонной кислоты — безопасно, нетоксично и более экологически чисто.
Поверхностная обработка, устойчивая к теплу табака и пятнам
Применяемые сценарии: Фабрики, школы, супермаркеты, офисы, больницы
Testing Items | Testing method | Test Results |
Appearance | GB/T 11982.2 | Compliant |
Length | GB/T 11982.2 | 15M |
Width | GB/T 11982.2 | 2M |
Overall thickness | GB/T 11982.2 | 2mm |
Rate of Dimensional Change After Heating | GB/T 11982.2 | Through |
GB/T 11982.2 | Through | |
Thermal Warping | GB/T 11982.2 | Through |
Flexibility | GB/T 11982.2 | No cracking |
Chair caster test | GB/T 11982.2 | No damage |
Colorfastness | GB/T 11982.2 | Level 6 or higher |
Residual Depression | GB/T 11982.2 | Through |
Welding strength | GB/T 11982.2 | Through |
GB/T 11982.2 | Through | |
Wear resistance | GB/T 11982.2 | T-Class |
Coefficient of static friction | GB/T 4100 | Through |
GB/T 4100 | Through | |
Non-slip rating | GB/T 11982.2 | R10 |
Pollution resistance | GB/T 11982.2 | Level 0 |
Volatile content | GB 18586 | Compliant |
Soluble lead and cadmium | GB 18586 | Compliant |
Vinyl chloride monomer content | GB 18586 | Not detected |
Formaldehyde | GB 18580 | Not detected |
Combustion performance | GB 8624 | B1 |
The data listed mostly come from third-party testing of incoming samples, and variations may occur across different batches and testing institutions.
Inspection Items | Inspection Methods | Test Results |
Length | ISO 24342 | 15m |
Width | ISO 24342 | 2m |
Overall Thickness | ISO 24342 | 2.0mm |
Residual Indentation | ISO 24343 | 0.05mm% |
Cigarette Test | EN 1399 | Grade 3 |
Dimensional Stability After Heating | ISO23999 | X Direction: 0.00% |
ISO23999 | Y Direction: 0.05% | |
Warping After Heating | ISO23999 | 0.00mm% |
Slip Resistance Grade | EN 16165 | R9/R10 |
Abrasion Resistance | EN 13845 | Particle Loss <10% |
Volume Loss | EN13329 | Roll Material 0.8 (After 20,000 Rotations) |
Color Fastness | ISO 105B02 | ≥ Grade 6 |
Caster Wear | ISO 4918 | No Damage |
Combustion Performance | EN 13501 | B |
TVOC | Passed | |
MAS | Passed | |
Floorscore | Passed |
The listed data are mostly third-party data tested only on the submitted samples; differences in batches and testing institutions may cause data variations.
Inspection Item | Inspection Method | Test Result |
Length and Width | ASTM F2055-10 | 2M*15M |
Thickness | ASTM F386 | 2.0mm |
Residual Indentation | ASTM F1914 | Pass |
Flexibility | ASTM F137 | Pass |
Dimensional Stability | ASTM F2199 | Pass |
Stain Resistance | ASTM F925 | Grade 0 |
Heat-Induced Dimensional Change Rate | ASTM F1514 | Pass |
Color Fastness | ASTM F1515 | ≥ Grade 6 |
Static Load Test | ASTM F970 | Pass |
Static Coefficient of Friction | ASTM C1028 | Pass |
ASTM C1028 | Pass | |
Smoke Toxicity | ASTM E662 | Pass |
Critical Radiant Flux of Floor Covering Material | ASTM E648 | Pass |
The listed data are mostly third-party data tested only on the submitted samples; differences may exist between batches and testing institutions.
邮箱提交
Подпишитесь на нашу рассылку*
*
